High Velocity Jet Cleaner

Consider just a few of the advantages of the Ian Dickie & Co Hydroblast Jet Cleaners:

View Accessories

• Effectiveness • Labour saving • Speed • Expert technical support • Full spares and after sales service • Versatility.

By using the wider range of accessories that we offer, you can effectively remove - Sand, sludge, roots and other pipe blockages.
There are numerous industrial applications including: Boiler & heat exchanger tube cleaning, tank cleaning, structure/machinery jetting and Ship Hull cleaning.

Features

Chassis

• Trailer mounted
• Robust mild steel channel with protective paintwork
• Single axle high speed trailer for manoeuvrability
• Leaf spring suspension
• Pneumatic tyres
• Adjustable stabiliser legs
• Retractable jockey wheel
• Pin type clevis hitch
• Standard features include overrun and park braking with optional pneumatic braking where required
• Manufactured fully to South African Road Ordinance Specifications, with chevron board and lights

Breaker Tank

• Corrosive resistant material either: Polyethylene, 3CR12 or stainless
• Standard size - 500Lt or to your requirements
• A heavy duty copper float with demand valve is incorporated
• Fire hydrant quick couplings are fitted either side of the tank
• Optional: a low - water cut out device (for pump protection).

Pump

• High quality robust triplex plunger pump (Either Pratissoli or Meyers)
• Fully adjustable automatic bypass and manual pressure relief valve.
• Available with : Flows from 30L/min. to 395L/min.
• Pressures from 50 Bar to 1200 Bar.

Filtration

• In-line stainless steel mesh Y filter or a high volume disc filter if the supply water is contaminated.

Engine

• Air or water cooled multi-cylinder electric start diesel engine
• All popular manufactured engines are offered to suit your preference and requirements
• Optional: high engine temperature and low oil pressure protection.

Hose-Reel

• Fully hydraulically operated robust steel reel with a hose capacity of 180m
• Sprocket and chain reduction drive
• Stainless steel greased lubricated HP swivel joint.

Hydraulics

• Hydraulic pump and motor
• Large capacity hydraulic oil tank sealed against water contamination
• System complete with fine mesh filtration and pressure relief valve.

Hose

• Urethane covered fibre reinforced hose is recognised as being the most effective type of hose for sewer jetting applications. This is due to its light weight allowing the nozzle to retrojet up the pipe with the minimum of resistance. Where there is a lot of abrasion or the hose rollers cannot be used, a steelwire reinforced hose is recommended.
• The standard length of hose is 121m with longer lengths available on request.

Instrumentation

All instrumentation and control valves are positioned at the rear of the machine to allow ease of operation by one operator.

Instrumentation and controls include:

• High pressure water gauge
• Oil pressure warning light
• Battery condition light
• Hour/rev meter
• Stop/start switch and cut out
• Engine speed control
• Hose reel out/in lever
• Reel speed control with infinite adjustment
• 3 way change over valve for pressure to nozzle, manual by-pass of auxiliary take-off.
• Manufactured fully to South African Road Ordinance Specifications, with chevron board and lights

Operation

The Ian Dickie & Co Jet Cleaner may be parked adjacent to the manhole or more conveniently, a reasonable distance away.
An upper manhole hose guide both directs and protects the hose as it enters the manhole. A second lower hose guide at the junction of manhole and sewer, performs the same function.
The hose, with its chosen nozzle or chain flail, is lowered directly into the sewer, thereafter moving itself upstream by means of the high velocity water retrojetting off the pipe wall. At the same time its central water jet (if fitted), sprays forwards, breaking up deposits in front of the hose.
When the hose is withdrawn, the rear water jets scour the sewer walls washing the debris down the line. Heavier material is drawn back to the manhole, where it is easily removed with a Venturi Jet Pump. This process is repeated until the pipe is cleaned to its original condition.
Once the hose has been reeled in, all that is required is a final spraying down of the manhole with a hand-held pressure gun. All in all - a highly efficient, time and labour -saving operation.
Ian Dickie & Co also offer truck mounted Gully Sucker and Jet Cleaner combinations.

Incorporating:

• 1000 to 6000Lt vacuum tank with specially designed rear door and discharge assembly.
• High volume vacuum blower.
• Blower silencer.
• Filtration bank.
• Cyclone separator.
• Hydraulic suction hose boom.
• The Gully Sucker and Jet Cleaner is sized according to your specifications and requirements.

Specifications

Model	PX122/120	PX152/120	PX262/120
L/Min	122	152	262
Bar	120	120	120
(kW)	30	35	60
LxWxH (MTR's)	3.4x1.6x1.6	4.2x1.8x1.8	4.4x1.8x1.8
WGT (kg)	1200	1600	2000

Truck mounted jet cleaner / gully sucker

The Ian Dickie Gully Jet/Sucker is able to Jet the pipe clean, bringing the debris back to the manhole. The Gully Sucker then lifts (suction lefts of up to 15M) and stores the debris in the vacuum tank until full. On clearing the blockage the truck can then drive to the discharge site and deposit the load.