Bitumen Emulsion Sprayers

ID 10 Manual                   ID 10 HOT                             ID Cold

The ID 10 M can be used for both open areas and for patch work.
The hand operated pump is double acting with ball valves and an air chamber is incorporated to ensure an even and balanced discharge.
The flow is regulated by the stroke. It is of a special construction to handle cold bituminous emulsions and can be easily dismantled for maintenance.
The strainer is positioned to keep the pump fully primed when the operation is intermittent. Always ensure to flush the pump is being left to stand for any length of time. The unit comes on a robust steel chassis with 4 x semi-solid rubber tyred wheels and is suitable for a 210lt drum.
It comes complete with a spray lance with 3m of hose, control valve and 2 X 65º nozzles and a suction probe
and hose.

ID 10 HB Hot Bitumen Emulsion Sprayer

Robustly constructed having the following additional features to the Flexian Model ID 10 Cold Bitumen Emulsion Sprayer:

• Ideally sized burner ring
• Full turntable steering incorporating towbar and handle-for easy on site manoeuvrability
• Gas regulator
• Air control valve
• Heat deflector shield
• Gas bottle carrying bracket

ID 10 HD Mobile Drum Heater and Transporter

For pre-heating bitumen emulsion drums Will raise temperature by 15-20º C in the same time it takes to spray out a 210 litre drum The ideal complement to the Flexian Model ID 10 Cold Bitumen emulsion Sprayer for increased production Drum Lifter For easy and safe handling of hot and heavy bitumen emulsion drums.

Features & Benefits

• High production - many times the daily output of hand sprayers
• Sprays cold emulsion with ease
• High efficiency cuts labour costs
• Light, manoeuvrable, compact
• Eliminates 'splotching'
• Far greater economy through more even distribution
• Gives smooth, even spray
• Easily transportable
• Robust construction takes rough handling
• No operator fatigue
• Unique Bypass System

Specifications

Engine	3,7 kW air-cooled recoil start petrol engine with 6:1 reduction gear. Output speed governed to approximately 500 r.p.m.
Filter	Washable stainless steel mesh filter element.
Pump	Gear type pump, direct drive from output shaft of engine reduction gear through a flexible coupling. Output when spraying bitumen emulsion is approximately 18lt per minute.
Lance	5m oil-resistant delivery hose fitted to 2m lance including handle grip, shut-off valve and 2 only 65º flat spray adjustable nozzles.
Chassis	Of all steel robust design on four 350mm x 100mm semisolid rubber tyred wheels and incorporating handle bar, splash guard, drum and lance carrying brackets.

When operating near kerbs or other structures which need to be kept clean, the built-in bypass system allows the spray to be instantly cut off or reduced by recycling all or part of the liquid delivered by the pump back to the inlet side of the pump.